Technologically leading.
Scientifically proven.

The effectiveness of the REWITEC® additive technology has been confirmed by independent scientific studies and standardized testing methods:

• Center of Competence in Tribology at Mannheim University (2-disc-, FZG-, SRV-Tests)
• Ingram Tribology, UK (MPR-Tests)
• Sentient Science, USA (Digital Clone based Lifetime Calculations)
• Romax Technology, UK (Main Shaft Bearing Lifetime Extension Calculations)
• SGS, China (No Harm Oil Analysis and Sealing Tests)

A closer look at the benefits of the REWITEC® additive technology:

• Up to 61% lower Sa: Average surface roughness improvement versus the reference cylinder
• Up to 35% lower Sz: Maximum-height roughness improvement versus the reference cylinder
• Up to 0.03mm wear / 1,000h: Measured liner-wear across the engine during project only

Copper Mine, Chile Fleet of Komatsu 980E-5 haul trucks operating under highly abrasive conditions. Extension of oil change intervals from 20,000 to 22,000 operating hours with measurable wear reduction.

Caterpillar CAT® 777 G Fleet Extension of PCR (Planned component replacement) intervals by more than 18,000 hours, in individual cases up to 26,000 hours.

Caterpillar CAT 797F / C175-20 Truck Engines Over 1.2 million gallons of fuel burned in continuous operation, confirming lower fuel consumption and reduced soot formation.

Main Conveyor Pulleys: Cut of damage vibrations by 70% (0.5 to 0.15 Gs) and eliminated the outer race fault, no component replacement required.

and many more

REWITEC GmbH
Dr.-Hans-Wilhelmi-Weg 1
35633 Lahnau
Germany

Phone: +49 (0)6441/44599-0
E-Mail: info@rewitec.com